Feed & EC
EC readings do not match
First compare the test methods, then compare the numbers. A supplier’s extraction result and drainage from a fertigated crop describe different samples.
Check with DripFind your next step →Feed & EC · WITH DRIP
Why does fertiliser dissolve poorly in cold water?
Use the product’s preparation instructions and temperature limitations.
Teral grower guidance · Updated 27 October 2026
DripYour feed & ec guideTHE COCOPEAT CONNECTION
Why the root zone matters
Incomplete dissolution can change the feed entering cocopeat and contribute to equipment blockage.
01 / OBSERVE
Three checks before you change anything
- Confirm the fertiliser is intended for stock-solution preparation.
- Review concentration, water temperature and mixing time against supplier instructions.
- Inspect undissolved material and avoid drawing it into the injector.
02 / NARROW IT DOWN
What is happening?
Choose the closest observation for a suggested next check.
Granules remain after normal mixing
Consult the supplier on the preparation conditions before using the batch.
Previously clear stock develops crystals
Review storage temperature and stock stability.
Water temperature is suitable
Investigate product mix-up, concentration or incompatible ingredients.
03 / TAKE THE NEXT STEP
Leave with something useful
Document a preparation method that works under the farm’s seasonal conditions.
Keep in mind
Do not use improvised heating equipment or exceed product handling instructions.
Discuss this with Teral →CONNECTED QUESTIONS